NOTE: the remote control can be stored in the foreseen space located on the back of
the appliance.
Caution: if you don't use your remote control for a long time, it is recommended to
remove the batteries because they could run.
USE
When the appliance is switched on for the first time, a slight smell may be emitted.
Please ensure sufficient ventilation. This smell will disappear very quickly.
The heater may be operated by the manual controls located on the heater or by your
remote control.
1.
Place the heater on a firm level surface.
2.
Set the main power switch to '0'. Plug in the appliance. Set the main power switch
to position 'I'. A beep will sound and the
there is power to the unit. The heater is ready for use.
3.
Turn the heater on by pressing the
The unit will display the current room temperature.
4.
Upon turning the heater on, the unit will be in the fan mode.
5.
Pressing the
display will show
6.
Pressing the
display will show
7.
To turn the heater off, press the
30 seconds before switching off. If you do not switch it off manually, the appliance
will switch off automatically after 12 hours.
button at this point will set the heater into 1500W mode (the
).
button a second time will set the heater into 2500W mode (the
).
button. The appliance will work in fan mode for
indicator will come on indicating that
button of the remote control or control panel.
18