Connections; Terminals - Ksenia lares wls 96-IP Manuel D'installation

Before powering and switching on the Panel, make sure that all necessary wirings have been executed.
• in presence of GSM Module, verify its connections to the Control Panel board, that the micro SIM be-
ing inserted and that the GSM Antenna has been linked by means of its SMA connector.
• in presence of PSTN Module, verify the connections with the Panel board. Insert the RJ11 connector
both for incoming and outcoming line.
• If present, verify the connection of the integrated Keypad with the BUS terminals
• In the presence of an Internet Network, wire the Ethernet cable to its connector
• if required, execute all wired inputs cablings
• if required, execute all wired outputs cablings
• Make all wirings for the Mains
• Connect the Battery using the provided cables.
EN
For all details on how to realize all connections, please refer to the next paragraphs
CLAMPS
+V
+P
-V
i1
+
A
B
-
o1
N
220 VAC
L
Connect to Protective Ground feeder
40
TYPE
i4
for integrated keyboard if present
on the front of the Control panel.
o2
CONTROL PANEL POWER TERMINALS

CONNECTIONS

23

TERMINALS

Power supply
Protective Ground
input
Serial communication BUS
Outputs
N
DESCRIPTION
Control panels Supply
Connect the output voltage 14,2V
from Power supply
It provides a positive auxiliary power
for connecteddevices to the Control Panels
(13,8V 1A max)
Negative power
Protective Ground
Input terminals
Output Terminals Open-Collector (OC)
L