Removing Battery - Daga CPR-700 Mode D'emploi

REMOVING BATTERY

The appliance must be disconnected from the supply mains when
removing the battery.
Ensure that the clipper is discharged of all power.
First remove the comb.
Then remove the blade.
Unscrew the 2 screws in the blade base of the unit.
Unscrew the screw on the lower back housing of the clipper.
Lift or pry the clipper halves apart, exposing the battery.
Cut the wires on both ends of the battery and remove it from the
battery case.
Pull downward the battery set from the unit.
The battery must be removed from the appliance before it is scrapped.
The battery is to be disposed of safety.
We hope that you will be satisfied with this product.
17