Denon Professional DN-300DH Guide D'utilisation page 7

Operation
Remote Control
1. Mute Button: Press this button to silence
the audio output. Press this button again to
turn the sound on. See
the Radio for more information.
2. ST/MO: In FM mode only, press this button
to alternate between Stereo mode and Mono
mode.
Stereo: FM stereo broadcasts are received
in stereo and the "ST." indicator lights on the
display.
Mono: To compensate for weak FM stereo
reception, select this mode. Reception will
now be monaural, reducing unwanted noise.
3. Menu/Enter: Press this button to access the
settings or to confirm a menu selection.
Press and hold this button to move back in
the menu.
4. Tuning Buttons: In Auto mode, press one of these buttons to go to the next clear station.
If in Manual mode, press one of the buttons for the stations to go up or down in one step
increments.
5. DAB Auto: Press this button when in DAB mode to auto search for DAB/DAB+ stations
that have a strong signal.
6. Band: Press this button to switch between DAB, AM, and FM modes.
7. APS: Press this button to search and store available radio stations automatically. It will
search for stations with RDS (Radio Data System) broadcasts first and then search for
others.
Note: This function will overwrite any previously stored radio station presets.
7
Operation > Using