Table des Matières
Publicité
DECORATIVE & LETTER
STITCH SEWING
You can combine decorative & letter stitches into a
string by selecting each pattern.
A. SELECTING DECORATIVE & LETTER
STITCH
1. Press the decorative & letter stitch button.
First 5 patterns of decorative patterns will be
indicated on the lower line of LCD.
2. By pressing the decorative & letter stitch button,
selecting group will change as below.
a. Decorative pattern
b. Letter stitch (Gothic)
c. Letter stitch (Script)
d. Letter stitch (Italic)
3. After you select the group, press the scroll
down button. Next 5 patterns of selected group
will appear.
By pressing the scroll up or down button, you
can scroll up or down in increments of 5
patterns.
4. To select a pattern, press the function button
directly under the indicated pattern.
(When letter stitch, lower line 5 patterns.)
Selected pattern will be indicated on the top left
side of LCD.
5. According to this procedure, select next
patterns you desire.
LCD will indicate selected patterns on top side
in selected order.
Machine can memorize 60 patterns maximum.
6. As selected patterns over the indicating area,
disappear from the screen, you can check them
by pressing the cursor buttons. (See next page)
B. TO CHANGE THE MODE
When you press the decorative & letter stitch
button, machine will default to selection mode.
At this mode, you can select pattern as described
above.
By pressing the mode button, you can change the
mode to setting mode.
At this mode, you can change below settings.
e. Setting of each pattern (stitch width, length,
mirror/reverse, elongation)
f. Single / twin needle setting
g. Repeat / Single sewing
h. Delete pattern
See following pages for each operation.
Mode is changed altenetely by pressing mode
button, and selected mode will be indicated as
highlight arrow mark on the right side of LCD.
78
9940EFSt.pm6
78
2003.9.10, 8:33 PM
Publicité
Table des Matières
