Patch Work; Applique - Singer 9940 Notice D'utilisation

Table des Matières

Publicité

PATCH WORK

For additional decorative purposes, use different
kind of materials.
No. 17, 18
General Purpose or Satin Foot
1. Place two pieces of fabric right sides together
and sew a long straight stitch.
2. Press the seam open.
3. Be sure that stitches fall on both sides of fabric.

APPLIQUE

No. 21, 22
Open Toe Foot
CAUTION: To prevent accidents.
Do not change the stitch width to wider than 5.0.
1. Fix applique on fabric with fabric glue, fusible
iron-on or basting stitches.
2. Sew edge of applique, while dropping the
needle as close to the edge as possible.
The straight stitch is almost entirely sink-
stitched and a hand-made effect is obtained.
a. When sewing sharp angles
Bring needle to lowest position and raise the
presser foot.
Use needle as pivot and turn fabric.
56
9940EFSt.pm6
56
2003.9.10, 8:32 PM

Publicité

Table des Matières
loading

Table des Matières