Publicité
Tipping the Machine
Fitting the brushes
Featuring the Nulock brush system.
The brush is fitted simply by pushing and twisting to lock in place, making fitting and removal a simple process.
Only use manufacturer supplied brushes.
This machine requires a 400mm brush or a 360mm pad.
6
7
Safety gloves are recommended for the changing of used brushes.
Machine Set-Up
0
L
Slide the brush / pad under the brush deck (Fig 6).
Fit the brush / pad onto the Nulock drive chuck, twist to lock
the brush / pad in place (Fig 7).
6
0
L
5
L
Publicité
