Publicité
!
After the removal of all the packaging, carefully open and check the contents.
1
2
4
5
Quick Set-Up Guide
Please read before commencing any operation.
Fit the Brush / Pad (Fig 2).
Swing the floor tool carrier from
behind the brush. (Fig 3).
Use the two locking knobs fitted to the floor tool, secure to the
floor tool to the floor tool carrier. (Fig 4).
Fill using a hose, bucket or a suitable container. (Fig 5).
Using the handle position lever, move the handle into the
upright position. (Fig 1).
Fill the clean-water tank to a Max of 18 litres
(see page 5)
For operation and cleaning controls
(see page 9)
4
Tip the machine.
(see Page 4)
0
L
3
!
Publicité
