Installation; Installing/Replacing The Lamp; Overhead Rigging - EuroLite ES 105W E-27 Mode D'emploi

Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

INSTALLATION

Installing/Replacing the lamp

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
For the installation, you need one E-27 ES UV lamp with max. 105W.
UV/ES illuminants are hazardous waste which needs to be disposed of appropriately.
Please dispose of the unusable UV/ES illuminants in accordance with the current legal regulations.
Procedure:
Step 1: Unscrew the fixation screws of the top housing cover with protective shield.
Step 2: Remove the housing cover.
Step 3: If replacing the lamp, remove the old lamp from the lamp-socket.
Step 4: Insert the new lamp into the lamp-socket.
Step 5: Replace the housing cover and tighten the screws.

Overhead rigging

DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
Do not operate this device with opened housing cover!
15/31
00038122.DOC, Version 1.2