List Of Materials; Parts Supplied; Parts Not Supplied; Product Dimensions - Elica ELI136SS Guide D'utilisation, D'entretien Et D'installation

List of Materials

Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp edges.
WARNING!
Remove the protective film covering the product before putting into
operation.

Parts supplied

• Hood assembly with blower and light bulbs
• Metal grease filters
• Duct covers
• Hardware bag with:
• Use, care and installation guide
• Installation template
• 4 - Duct cover plastic clips
• 4 - 6 x 16 mm blower mounting screws
• 4 - 5 x 45 mm mounting screws
• 6 - 3.5 x 6.5 mm mounting screws
• 2 - 3.5 x 9.5 mm mounting screws
• 60 - 4.2 x 8 mm mounting screws
• T10 TORX®† adapter
• T20 TORX®† adapter
Parts needed
• Home power supply cable
• ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• 8" round metal vent system

Parts not supplied

Optional Accessories
Tools/Materials required
•
•
•
•
•
•
•
•
•
•
•

Product Dimensions

12 ⁄ "
1
8 (20.32 cm)
(30.8 cm)
13 ⁄ "
3
16
(33.5 cm)
36" (91 cm)
42" (106.2 cm)
5
Level
Drill with 1¼" (3.2 cm),⅛" (3.2 mm), and
drill bits
Pencil
Wire stripper or utility knife
Tape measure or ruler
Pliers
Caulking gun and weatherproof caulking compound
Vent clamps
Jigsaw or keyhole saw
Flat-blade screwdriver
Metal snips
8"
Max 46
Min 33
27"
(68.6 cm)
⁄ " (7.9 mm)
5
16
⁄ " (117.4 cm)
3
16
⁄ " (84.4 cm)
2
8
12 ⁄ "
6
8
(32.3 cm)