Eazyzap FP983 Mode D'emploi page 4

UK
Cleaning, Care & Maintenance
Always switch off and disconnect the appliance from the power supply before
cleaning.
• Clean the collection tray regularly with warm soapy water.
• DO NOT immerse the appliance in water. Wipe the safety guard and external casing with a damp
cloth.
• Change the bulbs every 12 months.
Changing the Bulb
WARNING: Always turn Off the appliance and disconnect from the power supply before
changing the bulb.
1. Remove the collection tray.
2. Lay the appliance face down.
3. Unscrew the two screws holding the safety guard at the rear of the Pest killer.
4. Lift up the guard rail.
5. Holding the ends of the bulb, twist it 'forwards' in its socket until it clicks.
6. Slide the bulb up out of its sockets.
7. Replace with a new bulb.
8. Twist the new bulb 'backwards' to lock it back in place.
9. Replace the guard rail and the two screws.
Troubleshooting
Fault
The appliance is The unit is not switched on
not working
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Tube has expired
Tube is faulty or has not been fitted correctly
4
FP983-FP984-FP985_ML_A5_v3_20210611.indb 4 FP983-FP984-FP985_ML_A5_v3_20210611.indb 4
Probable Cause Solution
Check the unit is plugged in correctly
and switched on
Call EAZYZAP agent or qualified
Technician
Replace the plug fuse
Check power supply
Refer to the 'Changing the Bulb' section
2021/6/11 13:58 2021/6/11 13:58