iio RM1 Manuel D'utilisation page 7

UNPACK
Remove the Packaging
• Remove tape and any temporary labels from your refrigerator before use. Do not
• Carefully remove the protective plastic film on the doors and refrigerator body.
• If required, carefully use tweezers or other small instruments to start the peeling
Appliance Location
• To avoid noise and vibration, the appliance must be installed and leveled on a
• Keep away from heat and avoid direct sunlight.
• Do not place the appliance in humid or watery places to prevent corrosion or
• Ensure that the appliance is placed in a well-ventilated indoor location.
• Ensure that there is enough space around the appliance, as indicated in diagram
CHOOSE LOCATION
remove any warning labels, the model and serial number labels, or the circuit
diagram from the appliance as this will void the warranty.
at the corners.
solidly constructed floor. If required, adjust the leveling legs to compensate for the
unevenness of the floor.
reduced insulation efficiency.
(pg. 8), to allow for proper ventilation.
Note: Installation on carpeting, soft tile surfaces, a platform or weakly supported
structure is not recommended. Surface shall be flat and sturdy (rotate left and
right to adjust the wheel for levelling if unsteady).
LEVEL LEGS
7