remote control
Remote Control arrives paired to the adjustable base.
Three (3) AAA batteries are required to operate the remote.
ADJUST
Head Position Adjustments
Use to raise and lower the head section of
your adjustable base.
Foot Position Adjustments
Use to raise and lower the foot section of
your adjustable base.
* Not user programmable.
‡ Can be reprogrammed to user desired position.
The ZERO G, TV in Bed, Anti-Snore, and Favorite 1 in
bed presets can be re-programmed to any position
chosen by the user. Simply adjust the bed to the desired
position, then hold any of the 4 buttons down until the
remote backlight flashes twice. The button is now re-
programmed.
To restore the buttons to their original positions, depress
the One-touch Flat and Zero-G buttons simultaneously
for 5 seconds. The remote backlight will flash twice to
indicate the original positions have been restored.
PRESET
Zero G ‡
Adjusts your legs to relieve pressure off the
lower back.
Flat *
One-Touch Flat lowers head and foot to flat
position and turns off massage (if running).
TV in Bed Preset Position ‡
Brings head and foot into position for
viewing TV.
Anti-Snore Preset Position ‡
Raises the head of the bed slightly to help
open airways.
Favorite 1 Preset Position ‡
Reprogrammable Preset Position.
Underbed LED lighting *
Turn on/off underbed LED lighting.
13