To Recall The Selected Patterns - Singer 9960 Manuel D'utilisation

c. Setting the stitch width and length
Machine will pre-set the stitch width and length
suitable for the pattern.
1. You can make changes by pressing the function
button (F4) directly under the witdh and length
mark.
2. For narrower width, press function button F2(–).
For wider width, press function button F3 (+).
For shorter length, press function button F4 (–).
For longer length, press function button F5 (+).
Pre-set stitch width and length will be indicated
as a highlighted number.
You can change the width and length of other
patterns by shifting the position of the cursor.
By pressing the return button (F1), machine will
return to editing mode.
By pressing EDIT button, machine will return to
selecting mode.
d. Setting the thread tension
By pressing the function button (F5) directly
under the tension mark, LCD will indicate the
tension mode.
This setting will change the thread tension of all
combined patterns.
To increase the upper thread tension, press
function button F5 (+).
To decrease the upper thread tension, press
function button F4 (–).
Pre-set tension number is highlighted.
By pressing the function F3 (AUTO) button,
thread tension will return to pre-set.
By pressing the return button (F1), machine will
return to editing mode.
By pressing EDIT button, machine will return to
selecting mode.
Note:
If you press the clear "C" button at editing mode,
highlighted pattern will be deleted.
G. TO RECALL THE SELECTED PATTERNS
If you change the pattern to utility stitch,
machine will retain the combination of patterns
until the machine is turned off.
To recall these patterns, press the decorative
& letter stitch button. Machine will recall the
selected patterns.
(Thread tension will return to pre-set.)
To delete all patterns, press and hold the clear "C"
button for a long time. (See page 90)
94
F4
F1 F2 F3 F4 F5
F1 F3 F4 F5