Weller WT 2M Mode D'emploi page 14

Menu 2
First choose the channel you wish to setup.
Pressing and holding the Menu button (three seconds) takes you to menu 2 of the wished
channel.
Always make sure that the channel you have selected is the wished channel. The previously selected
channel is shown on the display.
If no channel is displayed, the changes refer to the entire device.
Fixed temperatures
Activation of the two fixed temperatures which can be individually adjusted.
Option
ON
OFF
If the fixed temperatures are activated, they can be selected and changed by pressing the UP and
DOWN buttons.
Backlighting
Option
0-100%
Floating switching output
Selection of Zero-Smog output or robot output
Option
ES FE
ES rob
1
Sensitivity
2
3
Option
4
5
1
2
3
4
5
Description
1 2
Fixed temperatures Activated
Fixed temperatures Deactivated (factory setting)
Description
LCD-Brightness (factory setting 80%)
Description
1 2
Zero-Smog output activated (factory setting)
Robot output activated
Description
Non-Sensitive – Reacts to heavy (long) movement
Standard (factory setting)
Sensitive - Reacts to light (short) movement
EN
ENGLISH
14