Connection - Sony MEX-N4200BT Mode D'emploi

Connection


White
White/black striped
Gray
Gray/black striped
Green
Green/black striped
Purple
Purple/black striped
Black
Yellow
Red
Blue/white striped
*1 Not supplied
*2 Speaker impedance: 4 Ω – 8 Ω × 4
*3 RCA pin cord (not supplied)
*4 Depending on the type of car, use an adaptor for
a wired remote control (not supplied). For details
on using the wired remote control, see "Using
the wired remote control" (page 36).
*5 Whether in use or not, route the microphone
input cord such that it does not interfere with
driving operations. Secure the cord with a clamp,
etc., if it is installed around your feet.
* 3
* 3
Power amplifier*
Front speaker*
Rear speaker*
For details, see "Making
connections" (page 36).
from a wired remote control
(not supplied)* 4
from a car antenna (aerial)
Subwoofer* 1
1
1 * 2
1 * 2
Microphone
1 5
XA-MC10 * *
35
GB