Description Of The Product - Absaar AB-MJS400 Mode D'emploi

Operating instructions
 RISK OF ELECTRIC SHOCKS !
• Do not expose the Mini Jumpstarter to rain, water, vapour
or condensation.
• Do not insert any foreign bodies or objects in the connector
of the clamps or in the USB port.
• Always keep children at a distance.
• Do not open the Mini Jumpstarter to change the internal
batteries. The batteries cannot be replaced.
 RISK OF EXPLOSION !
• Do not expose the device to direct sunlight!
• When using the Mini Jumpstarter, do not smoke and keep
any incandescent objects at a distance!
• Do not use the Mini Jumpstarter in confined smoke-filled
spaces such as in the hold of a motorboat.
• Do not use the Mini Jumpstarter near to propane tanks.
• The clamps of the Mini Jumpstarter must be connected to
the correct polarities of the vehicle:
• Red Positive (+) clamp of the Mini Jumpstarter to the Red
Positive (+) terminal of the vehicle battery.
• Black Negative (-) clamp of the Mini Jumpstarter to the
Black Negative (-) Terminal of the vehicle battery.
• An Inversion of polarity can damage the Mini Jumpstarter!
 COMMENT :
Store the Mini Jumpstarter in a sheltered space away from extreme temperatures for best performance in conditions
above 0 degree.
People (children in particular) who lack the knowledge or have insufficient experience with the device or have a physical,
sensory or mental handicap should only use the device under the supervision of someone responsible who will ensure
their safety. Children must be supervised and must not be allowed to play with this device.

3) DESCRIPTION OF THE PRODUCT

➊ ➋ ➌ ➍ ➎
 FIRE HAZARD !
• Do not crush.
• Do not perforate.
• Do not make the clamps touch each other or create an
electrical connection between them with a piece of metal
or a conductor. This can damage the Mini Jumpstarter or
create a hazard.
• Always disconnect the connector of the clamps immedi-
ately after use.
• Do not store the Mini Jumpstarter with the clamps connected
to the device.
• The Mini Jumpstarter is only designed to be used for a very
short period of time. Each start-up attempt should not ex-
ceed 3 seconds. Using the Mini Jumpstarter for more than
3 seconds can damage it. Wait for 1 minute between each
start-up attempt.
 CAUTION
Working temperature. Do not expose to working tempera-
tures in excess of +60°C (+140°F) or less than -20°C (-4°F).
Using the Mini Jumpstarter above or below these temper-
atures can reduce the capacity of the Mini Jumpstarter's
internal battery or shorten the service life of the battery.
➏ ➐ ➑ ➒
8
➊ Torch (LED lighting)
➋ LED indicator 12V/16V/19V
➌ Output 12V/16V/19V
➍ Charging indicator
➎ On/Off Button
➏ USB Output
➐ Charging Input
➑ Main switch
➒ Jumpstart-Socket
ABSAAR