Lovibond TC 140 G Mode D'emploi page 16

26. Unscrew the pin.
Use the spanner provided.
27. Screw in the pin on the opposite
side.
28. U n s c re w h i n g e
bracket.
29. Remote the cover, turn it through
180° and re-fit it on the opposite
side.
30
16
27
26
28
29
30. Screw hinge bracket into
place.
31
31. Insert the pin into the left-hand door mount-
ing.
Use your index finger to hold the pin while
you are assembling the door.
32. Locate the door on the upper
pin as shown in the illustration
and guide it to the lower hinge
bracket.
Important
As a result of its heavy weight, the door
must be held secure by one person.
33. Lift the door upwards and turn
the pin until it fits into the bore
hole of the hinge bracket.
Slowly lower the door down-
wards. The lower part of the pin
must be fully engaged in the bore
hole of the hinge bracket.
34. Screw the screw into
the pin again and
tighten.
32
33
TC 140 G / TC 256 G_1 04/2014
34