Télécharger Imprimer la page

Domo DO7327R Mode D'emploi page 24

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
·
Position 3 will heat the area more quickly than position 1.
·
Switch the appliance off by setting the temperature button to MIN and the power button to 0. Remove
the plug from the socket.
SAFETY DEVICES
·
This heater is protected with an overheat protection that switches off the heater automatically in case
of overheat, e.g. due to the total or partial obstruction of the grids. The overheating shut-off switches
off the temperature inside when the appliance exceeds the normal running temperature. The heating
element will automatically stop working, the motor will continue to operate, the internal heat shed.
This protective device applies only to the appliance itself and has no influence on room temperature
regulation. In this case, unplug the appliance, wait about 10 minutes for it to cool and remove the
object that is obstructing the grids. Then switch it back on as described above. The appliance should
operate normally. Should the problem persist, please contact the nearest customer service.
·
The appliance is also equipped with a tip-over safety, which is integrated in the appliance. The
appliance will turn off when it tips over.
CLEANING AND MAINTENANCE
·
Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down
completely.
·
To avoid the risk of electric shock, do not clean the heater with water and do not immerse it. Clean the
housing with a damp cloth.
·
Allow the unit to cool down completely before storing it.
·
Store the appliance in a clean and dry place.
·
You can easily move the device thanks to the handles.
SPECIFICATIONS
Model identifier(s): DO7327R
Item
Heat output
Nominal heat output
Minimum heat output
(indicative)
Maximum continuous
heat output
Auxiliary electricity
consumption
At nominal heat
output
At minimum heat
output
24
DO7327R
Symbol
Value
Unit
Pnom
0.8
kW
Pmin
0.7
kW
Pmax
0.8
kW
---
---
---
elmax
0.000
kW
elmin
0.000
kW
Item
Type of heat input, for electric storage
local space heaters only
manual heat charge control,
with integrated thermostat
manual heat charge control
with room and/or outdoor
temperature feedback
electronic heat charge control
with room and/or outdoor
temperature feedback
fan assisted heat output
Type of heat output/room temperature
control
single stage heat output and
no room temperature control
Unit
N/A
N/A
N/A
N/A
N/A

Publicité

loading