Domo DO7327R Mode D'emploi page 23

PARTS
1. Air inlet
2. Temperature button
3. Power button
4. Cord storage
5. Handle
6. Heating element
7. Swivelling wheels
BEFORE THE FIRST USE
· The heater should only be operated at a minimum distance of 60 cm from any wall or other object that
could disturb its operation.
· Position the air flow in order to optimise the heating of the room. Make sure sufficient air can circulate
under the appliance.
· Place the appliance on a smooth, stable surface. Do not place the appliance on deep-pile carpeting.
· When the appliance is switched on for the first time, a slight smell may be emitted. Please ensure
sufficient ventilation. This smell will disappear very quickly.
· Only use the appliance upright, with the wheels underneath.
ASSEMBLY
1. Carefully turn the appliance upside down and place it on a smooth surface.
2. Remove the wingnuts (a) from the bracket (b).
3. Place the bracket (b) between the last and second-last heating elements
and secure a plate with swivelling wheels on the bracket (b) using the
wingnuts (a).
4. Place the other plate with swivelling wheels on the pre-mounted screws.
Secure the wingnuts on the screws.
5. Turn the appliance upright, with the wheels underneath.
USE
· Set the temperature button to MIN and the power button to 0. Put the plug in the socket.
· Turn the buttons to the required position. Make sure that the appliance is not covered, and that there
is enough free space around it for ventilation.
Temperature button
· Use this button to control the temperature. When set to MIN, the appliance is off.
· Turn the button towards MAX. The further you turn the button, the hotter the oil
radiator.
Power button
· You can use the power button to select between three different settings:
(1200 W), 3 (2000 W).
www.domo-elektro.be
The selected position will light up.
6
7
1 (800 W), 2
5
3
2
1
4
(a)
(b)
DO7327R
23