Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Drill
Check to make sure you have the following parts indicated below:
Traditional Collection Series B
Robe Hook
Paper Holder
Towel Bar
Towel Ring
1. Using the towel bar as a template, mark the center locations of each
post.
2. Center a mounting disc over each of the marks from step 1 and mark
the locations for the screws.
3. Choose your installation method.
NOTE: These accessories work best if secured to a wall stud or stringer
using the supplied screws.
For Drywall:
• Drill a hole at each marked location.
• Insert anchors until they are flush with the face of the finished wall.
• Place the mounting bracket over the drywall anchors, insert the
screws and tighten to secure them.
TOOLS YOU WILL NEED
Phillips
Screwdriver
BEFORE INSTALLATION
1
1
2
1
INSTALLATION PROCEDURE
Pencil
Level
2
2
2
2
4
4
2
2
3
Tape
Measure
1
1
1
1
2
1
1
1
Publicité
Chapitres
Table des Matières
