Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short-circuit, burns, electric shock, lamp explosion, crash etc.
OVERVIEW
(1) Fixation screw
(2) Mounting-bracket
(3) Ventilation fan
(4) Safety eyelet
(5) Channel control lights
(6) LED display
(7) MIDI IN
(8) MIDI THRU
(9) Circuitbreaker
(10) DMX IN
(11) DMX OUT
(12) Power supply
(13) Program buttons
INSTALLATION
Installing/Replacing the lamps
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 20 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
DANGER TO LIFE!
Only install the lamps with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
18/44
41907070_V_1_0.DOC
Publicité
Table des Matières
