General Precautions; Declaration Of Conformity Of The Manufacturer; Installation Regulations - Nordica Inserto 50 Crystal Manuel Utilisateur

GENERAL PRECAUTIONS

La NORDICA S.p.A. responsibility is limited to the supply of the appliance.
The insTallaTion musT be carried ouT scrupulously according To The insTrucTions provided in This manual
and The rules of The profession. insTallaTion musT only be carried ouT by a qualified Technician who works
on behalf of companies suiTable To assume The enTire responsibiliTy of The sysTem as a whole.
La NORDICA S.p.A. DeCLINeS ANy ReSpONSIbILIty fOR the pRODuCt thAt hAS beeN mODIfIeD wIthOut wRItteN
AuthORISAtION AS weLL AS fOR the uSe Of NON-ORIgINAL SpARe pARtS.
This appliance is noT suiTable for The use of inexperienced people (included children) or wiTh physical,
sensorial and menTal reduced capaciTies. They have To be conTrolled and educaTed in The use of The appliance
from a responsible person for Their securiTy. The children have To be conTrolled To be sure ThaT They
would noT play wiTh The appliance. (en 60335-2-102/7.12).
It IS ObLIgAtORy tO ReSpeCt the NAtIONAL AND euROpeAN RuLeS, LOCAL ReguLAtIONS CONCeRNINg buILDINg mAtteR
AND ALSO fIRepROOf RuLeS.
NO mODIfICAtIONS CAN be CARRIeD Out tO the AppLIANCe. La NORDICA S.p.A. cannot be held responsible
for lack of respect for such precautions.

DECLARATION OF CONFORMITY OF THE MANUFACTURER

Object: AbSENCE OF ASbESTOS AND CADMIUM
We declare that the materials used fOr the assembly Of all Our appliances are WithOut asbestOs parts Or asbestOs
derivates and that in the material used fOr Welding, cadmium is nOt present, as prescribed in relevant nOrm.
Object: CE N. 1935/2004 REGULATION.
We declare that in all prOducts We prOduce, the materials Which Will get in tOuch With fOOd are suitable fOr
alimentary use, accOrding tO the a.m. ce regulatiOn.

INSTALLATION REGULATIONS

insTallaTion of The producT and auxiliary equipmenT in relaTion To The heaTing sysTem musT comply wiTh all
currenT sTandards and regulaTions and To Those envisioned by The law.
The insTallaTion and The relaTing To The connecTions of The sysTem, The commissioning and The check of
The correcT funcTioning musT be carried ouT in compliance wiTh The regulaTions in force by auThorised
professional personnel wiTh The requisiTes required by The law, being naTional, regional, provincial or Town
council presenT in The counTry wiThin which The appliance is insTalled, besides These presenT insTrucTions.
insTallaTion musT be carried ouT by auThorised personnel who musT provide The buyer wiTh a sysTem
declaraTion of conformiTy and will assume full responsibiliTy for final insTallaTion and as a consequence
The correcT funcTioning of The insTalled producT.
before installing the appliance, carry out the following checks:
• canalization of the warm air (see cap. canaliZaTion).
• Verify if your structure can support the weight of the appliance. In case of insufficient carrying capacity it is necessary to
adopt appropriate measures, la nordica responsibility is limited to the supply of the appliance (see chapter TECHNICAL
DESCRIPTION).
• Make sure that the floor can support the weight of the appliance, and if it is made of flammable material, provide suitable insulation
(DIMENSIONS ACCORDING TO REGIONAL REGULATIONS).
• Make sure that there is adequate ventilation in the room where the appliance is to be installed.
• do noT insTall The appliance in rooms conTaining collecTive venTilaTion ducTs, hoods wiTh or
wiThouT exTracTor, Type b gas appliances, heaT pumps, or oTher appliances ThaT, operaTing aT
The same Time, can puT The room in depression (ref. uNI 10683 standard)
• Make sure that the flue and the pipes to which the appliance will be connected are suitable for its operation. It is NOt allowed the
connection of various appliances to the same chimney.
• The diameter of the opening for connection to the chimney must at least correspond to the diameter of the flue gas pipe. The
opening must be equipped with a wall connection for the insertion of the exhaust pipe and a rosette.
• always leave the recommended air pocket between the appliance and the walls, rear and side min. (see declaratiOn Of perfOrmance).
• establish the type of ventilation (natural or forced) see chapter ventilatiOn hOOd Or adjacent lOcal.
AFTER TESTING THE PROPER wORkING OF THE APPLIANCE, SOME DAYS FROM THE INSTALLATION, IT IS POSSIbLE TO PROCEED wITH
THE CONSTRUCTION OF ITS AESTHETIC COvERING.
wARNING - during the surrOund building OperatiOns it must kept in mind pOssible and subsequent electrical installed
parts maintenance (fans, temperature prObe, etc) and With hydraulic systems all parts cOnnected tO the prOduct.
wARNING - wHEN INSTALLING INSERTS, ACCESS MUST bE PREvENTED TO THE INTERNAL PARTS OF THE APPLIANCE AND IT MUST
NOT bE POSSIbLE TO ACCESS LIvE PARTS DURING ExTRACTION OPERATIONS. ANY wIRING, FOR ExAMPLE THE POwER CAbLE OR
ROOM PRObE, MUST bE POSITIONED SO AS NOT TO bE DAMAGED DURING MOvEMENT OF THE INSERT AND MUST NOT COME INTO
CONTACT wITH HOT PARTS.
La NORDICA S.p.A. DeCLINeS ALL ReSpONSIbILIty fOR DAmAge tO thINgS AND/OR peRSONS CAuSeD by the
SyStem. IN ADDItION, It IS NOt ReSpONSIbLe fOR ANy pRODuCt mODIfIeD wIthOut AuthORISAtION AND eveN
LeSS fOR the uSe Of NON ORIgINAL SpARe pARtS.
your regular local chimney sweep musT be informed abouT The insTallaTion of The appliance so ThaT he can
check The correcT connecTion To The chimney.
24 ENGLISH