Table Des Matières; Introduction - Husqvarna PAX1100 Manuel D'utilisation

Introduction..................................................................... 2
Safety..............................................................................4
Assembly........................................................................ 7
Operation........................................................................ 8
Product description
We have a policy of continuous product development
and therefore reserve the right to modify the design and
appearance of the products without prior notice.
Note: This manual cover gasoline operated power units.
Attachment overview
9
10
3
12
1. Chain lubrication adjustment screw
2. Shaft
3. Chain tensioning screw
4. Harness support hook (24 mm)
5. Protective guard for saw chain
6. Bar nut
7. Saw chain
8. Guide bar
9. Filling with chain oil
10. Chain oil tank
11. Harness support hook (1")
12. Operator's manual
2
Contents
Maintenance................................................................. 10
Technical data.............................................................. 15
Accessories.................................................................. 16

Introduction

Intended use
This attachment is only designed for cutting branches
and twigs.
8
7
6
5
15
16
13. Transport guard
14. Combination wrench
15. Harness
16. Torx wrench
17. Hand guard
Symbols on the attachment and on the
power unit
WARNING: This attachment may only be
used together with the intended product, see
the accessory chapter in the Operator's
Manual of the product.
4
1
2
13
Careless or incorrect use of this product can
result in serious or fatal injury to the operator
or others.
11
17
14
1349 - 003 -