Dörr HS-500 Notice D'utilisation page 11

06 | OPERATION
06.1 Inserting/Replacing the batteries (batteries optional)
Screw-o the battery compartment cover (5) and take out the battery cartridge (6). Insert 3pcs D XL batteries (optional) accor-
ding to polarity markings (+/-) into the battery cartridge (6).
Slide the battery cartridge back into the battery compartment. Make sure that the battery contacts (7) of battery cartridge are
coincide with the battery contacts inside the battery compartment (4).
Screw on the battery compartment cover again.
06.2 Turn on/o the head light
To turn on/o the head light press the On/O button (2) at the light grip.
06.3 Brightness/Strobe Mode
To adjust the brightness or for selecting the strobe mode press the On/O button (2) as follows:
100% brightness press 1x
50% brightness press 2x
Strobe mode press 3x
06.4 Locking lever
Use the locking lever (3) to either save the light settings or to prevent the light from turning on:
= unlock
06.5 Carrying strap
Attach the snap hooks of the carrying strap to the two eyelets (8).
07 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfi ber cloth to
clean the outer parts of the device. Store the device in a dust-free, dry and cool place. This device is not a toy – keep it out of
reach of children. Keep away from pets.
= lock
11