Heiniger XPERT Mode D'emploi page 31

Fig. 6
Fig. 7
Fig. 9
NOTE!
Make sure the clipping blades are positioned correctly when
X X
installing the new or sharpened blades.
The tapered pins of the chicken feet must engage exactly in the
X X
positioning holes of the upper blade.
Instruction Manual / Xpert 2-Speed sheep clipper
Release the comb plate screws and
X X
pull the comb plate from the shear-
ing head.
Remove the upper blade.
X X
Fig. 8
Place the new upper blade in the ta-
X X
pered pins of the chicken feet.
Apply a few drops of oil on the pol-
X X
ished surfaces of the upper blade.
13