Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions - FPX Suspension Option (-SUS)
1.
Fix mounting bracket to ceiling, ensuring the ceiling retention capable of supporting at least 10 lbs. for 2x2/1x4 and 20
lbs. for 2x4.
2.
Clip carabiners to holes in the suspension brackets (see detail view A).
3.
Adjust suspension height by pressing plunger on the mounting bracket (see detailed view B) and pulling the cable
through the top until reaching desired level. The height can be adjusted within a range of 7 ¼" to 27" . Excess cable can
be trimmed as desired.
4.
Adjust side to side using 2.5mm allen wrench to loosen the cable set screw on the bottom of the cable retainer. See
arrow.
A
Figure 1.
2
COOPER LIGHTING SOLUTIONS
Detail A
IB519102EN
Installation instructions
B
Plunger
Detail B
Publicité
