LENCO DIR-150 Mode D'emploi page 13

Note that the alarm source is from the preset Internet radio if Alarm Sound is
set to be Internet Radio. It can only set one same IR station for Alarm 1 and
Alarm 2. When the alarm is reached the unit connects to the Internet if the set
network is available. Therefore there may be some delay from the alarm to the
radio play. If no network is connection can be established within one minute,
the alarm will change to Melody automatically.
When Alarm "NAP" is set, it alarms once in 5/10/20/30/60/90/120 minutes
depending on which one you have set.
Choose Alarm Volume to configure the volume of the alarms.
Timer Countdown timer (max. 100min)
Language English/Deutsch/Espanol/Francais/Portugese/Nederlands/Italiano/Pyccknn/
Svenska/Norske/Dansk/Magyar/Cesky/Slovensky/Polski/Turkce/Suomi
Dimmer Power Saving/Turn On
Display color/monochrome
Power Mgmt Configure to go to standby mode automatically during in the menu or/and
without Wifi signal. Choose the power management timer (5/15/30mins) to set
the duration of the radio to switch standby mode automatically when you are
not controlling it. Choose Turn off to ignore the power management function.
Sleep Timer Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes. Once the
time is set, there will be a bed icon with remaining minutes at the top right
corner and the device will turn to standby then. Press Sleep on the remote
control for the shortcut of this function.
Buffer Configure the buffer time of the music playback, 2/4/8 seconds.
Weather Activate/deactivate the weather forecast for the standby display. Choose your
preferred temperature unit (°F or °C) and then proceed entering your location.
When activated, the weather forecast is shown in turns with the clock display
on the standby screen (each 10 secs)
FM Setup You could choose Mode or Threshold
Local Radio Setup There is a shortcut Local Radio under Internet Radio so that you can easily go
to the station list of your location. You may Manual Setup your location, or let
the system Auto Detect your current location. The system detects the location
according to the IP address of your connected network. Press Local Station to
enter this local radio list directly.
Playback Setup Select the playback mode of media center-Off (no repeat or shuffle), Repeat
all, Repeat one, or Shuffle.
Device Default device name for DLNA is "AirMusic". You may rename it for DLNA setup
on the PC or mobile. QR code for download and install "AirMusic" control App.
Equalizer Default equalizer is Normal, you may change to Flat, Jazz, Rock, Soundtracks,
Classical, Pop, or News MY EQ. Press EQ on the remote control to swap among
the EQ mode for shortcut.
Resume When The system is default to resume internet radio playback if you were listening to
Power On internet radio or media center before switch off the unit. If turn this setting
off, the system will remain in the main menu when switching on the unit.
Software Update Update software. If there is an updated software version on the server, the
system will notify you. Before starting a software upgrade, ensure that the unit
is plugged into a stable mains power connection. Disconnecting power during
a software update may permanently damage the unit.
Reset to Default Restore the default settings. After the DIR-100 is reset, the system will move to
language is elected.
13