Siemens TI90 HC Série Mode D'emploi page 64

en Menu settings
Select usermode
Beverage info
Factory settings
Demo mode
Beverage settings
Espresso / Cof-
fee temperature*
* Temperature at
time of brewing,
can vary when
measured in the
cup
Macchiato pause
Order coffee/milk
Reset beverage settings
User profiles
Cupwarmer
Bean container
64
default mode
■
barista mode
■
Shows the volume of drinks dispensed since the appliance was commissioned.
For technical reasons, the counter does not represent a precise number of cups.
Appliance reset to factory set-
tings
on
■
off
■
88 °C
■
90 °C
■
92 °C
■
94 °C
■
95 °C
■
96 °C
■
Short
■
Medium
■
Long
■
first milk
■
first coffee
■
Leave profiles automati-
■
cally
Delete all profiles
■
on
■
off
■
Setting that governs which bean container is automatically active.
The bean container can be selected directly prior to each dispensing operation
using the "Bean container" selection buttons.
Default container right
■
In the "barista mode" setting, the following can
be performed directly in the display:
The temperature can be set by pressing the
■
left navigation button.
The aromaIntense (brew speed) can be set
■
in three levels by pressing the right naviga-
tion button.
Resets all your own settings to the condition
when delivered.
For presentation purposes only. The setting "off"
must be activated for normal operation. The set-
ting is only possible in the first 3 minutes after
switching on the appliance.
Setting the temperature for coffee drinks.
The setting is effective for all preparation types.
Applies only to "default mode" - in "barista
mode" directly adjustable via drink selection.
~ "Adjusting beverage settings" on page 58
Setting the period between milk froth and coffee
dispensing.
The longer the period, the clearer the formation
of layers of milk and coffee.
Setting that governs whether milk or coffee
should be brewed and dispensed first. (Cappuc-
cino)
The individual settings for the drinks are reset to
the factory settings.
Setting that governs whether the user profile is
automatically exited or deleted.
If the cup warmer is switched on, the cup
warmer LED lights up.
Each time a beverage is dispensed, the appli-
ance automatically returns to the right bean con-
tainer.