Table Des Matières; Introduction; Kit Contents - FMS 850mm Flash Manuel D'utilisation

Introduction

For the pursuit of ultimate speed- introducing the FMS Flash!
Designed to minimize drag, the sleek and slender FMS Flash
slips through the air like a bullet- reaching whopping speeds of
up to 180km/h. The reinforced fuselage and swept wings ensure
maximum airframe rigidity even in extreme conditions.
Equipped with a FPV-ready canopy, users could easily install
their favorite FPV gear to experience the speed for themselves.
A specially designed handle grip and airframe skid under the
fuselage ensures perfect hand-launch and belly landings every
time.
If you have the need for speed, your search is over! The 850mm
FMS Flash is your ultimate speed machine.
Features:
• 3536-1750kv motor, 60A esc
• Pusher configuration
• 180km/h top speed
• FPV Ready

Kit contents

Before assembly, please inspect the contents of the kit. The
photo below details the contents of the kit with labels. If any
parts are missing or defective, please identify the name or
part number (refer to the spare parts list near the end of the
manual) then contact your local shop or email us: support
@fmsmodel.com.
Specifications
Wingspan: 850mm(33.5in)
Overall Length: 890mm(35in)
Flying Weight: ~890g
Motor Size: 3536-KV1750
Wing Load: 74g/dm²(0.17oz/in²)
Wing Area: 12dm²(186sq.in)
Prop Size: 7*5
ESC: 60A
Servo: 9g Servo x 4
Recommended Battery: 14.8V 2200mAh 35C
Table of contents
Introduction ·····························································
Kit contents ····· ·························································3
Model assembly
·······················································4
Battery installation
·············································
Receiver diagram
····· ·········································
Get your model ready to fly
Clevis installation ············································
Control horn and servo arm settings
Center of gravity(CG)
··············································· 9
Before flying the model
Flying course
·························································10
Troubleshooting ······················································11
Spare parts list content
A.
B.
D.
F.
I.
H.
A: Fuselage D: Vertical stabilizer
B: Canopy E: Main wing
C: FPV Canopy F: Horizontal stabilizer
3
·····
··································
········ 9
····· ·························· 9
············································10
············································11
C.
E.
G.
G: Wing spar
H:Screw set, pushrods
and Y harness
I:Propeller
3
······ 7 ··
······ 7 ··
····· ·· 7
··
··
··