Vintec A18342801 Guide D'utilisation Et D'entretien page 23

3. Unscrew the bottom hinge pin
bracket from the bottom of the door.
Place door on a padded surface to
prevent damage.
CAUTION
Door may slide if not held while perform-
ing this step since door is supported by
a pin.
4. Remove the plastic cover located
on the opposite side of the door and
place it where the hinge pin bracket
was located.
Door Reversal
5. Unscrew the top hinge using a
Phillips head screwdriver.
+
+
+
6. Carefully remove the left side top and
bottom screw hole plugs and move
to the opposite side of unit.
7. Attach the top and bottom left side
hinges on the unit.
+
+
+
23