Futech MULTICROSS 3 Super Vision Mode D'emploi page 39

IMPORTANT!
Read the instructions for use carefully before using the instrument. Keep them in a safe
place for consultation when necessary.
1.
Whether on or off, keep the instrument out of reach of children.
2.
This equipment is a high quality precision instrument which must be handled
with care.
3. Avoid shocks and vibration.
4.
After use, always replace the instrument in its carrying case.
5.
Make sure that the case and instrument are dry; otherwise condensation may
occur in the device.
6.
Make sure that the windows are free of dirt, and clean them using a soft cloth and
a glass cleaning product only.
7.
Always use the locking device during transportation.
8.
Regularly inspect the accuracy of the instrument, especially when starting any
major square-setting work. You have sole responsibility for the accuracy of your
work.
9. Do not use any optical equipment such as a magnifying glass to view the laser
beam, and take care to remove all reflecting objects to avoid damage to the eye.
10. Locate the laser in such a way that it is not possible for any person to look at the
laser beam (intentionally or otherwise).
11. Under no circumstances take the instrument apart, since this may expose you to
powerful laser radiation.
12. The laser is only to be used for the projection of laser lines.
13. Do not use the instrument in rain or near flammable materials.
14. Technical modification or alterations to the instrument may be carried out
without prior notice.
15. The manufacturer's responsibility shall in no case exceed the value of the costs of
repair or replacement of the instrument.
16. Respect the environment and do NOT discard the instrument or batteries in
household waste. Take them to a recycling centre.
Multicross_3_Super_Vision_New.indd 39
Multicross 3 Super Vision
EN
39
26/09/2011 15:35:53