Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRODUCT SPECIFICATIONS
Table Dimensions ................................ 16 in. x 32 in. x 1 in.
Maximum Cutter Diameter .................................1-15/16 in.
Fence Length.............................................................. 28 in.
VACUUM
PORT
THROAT PLATES
KNOW
YOUR ROUTER TABLE
See Figure 2.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BIT GUARD
The articulating router cutter bit guard on the fence assembly
provides a barrier to protect the operator from contact with the
cutter and is designed to stay in contact with the workpiece.
FEATHERBOARD
The featherboard allows for safe movement of the workpiece
through the cutter area and is height adjustable.
FEATURES
Miter Slot ........................................ 1/4 in. x 3/4 in. x 32 in.
Rating .............................. 120 V, 60 Hz, AC only, 15 Amps
Net Weight .................................................................28 lbs.
FENCE
BIT GUARD
ASSEMBLY
INSERT
PLATE
SWITCH
ASSEMBLY
BUTTON
FENCE ASSEMBLY
The sacrifical MDF fence assembly provides an adjustable
surface to support and guide the work. Molded into the fence
assembly is the vacuum port.
INSERT PLATE
The insert plate can be used in comination with a variety of
routers. It also has pre-drilled countersunk holes that can
be used with a variety of routers.
MITER GAUGE
A miter gauge is used for mitered routing and to help support
wider pieces.
6
STARTING
PIN
RESET
FEATHER
BOARD
MITER
GAUGE
Fig. 2
Publicité
Table des Matières
