Operation - Ryobi A25RT02 Manuel D'utilisation

WARNING:
Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes, resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
 Table mounted dado and mortise operations in wood and
wood composition materials
 Fence guided edging operations for cabinetry and
picture framing on wood and wood composition
materials
 Piloted cutter operations using the starting pin for
edging patterned surfaces on wood and wood
composition materials

OPERATION

WARNING:
The router or router table should never be connected to
a power supply when you are assembling parts, making
adjustments, installing or removing cutters, cleaning, or
when not in use. Disconnecting the router and router table
will prevent accidental starting that could cause serious
personal injury.
WARNING:
The direction of feed for the workpiece is always against
the sharp edges of the cutter and therefore into the rota-
tion of the cutter. Failure to heed this warning can result
in serious personal injury.
WARNING:
When operating the router with the router table, the
router must only be plugged into and controlled by the
router table switched outlet. To reduce the risk of serious
personal injury, never connect the table mounted router
into another power source.
16