Care And Maintenance; Cleaning The Exhaust Filters; Surface Light Replacement - Furrion FMCM15-BL Manuel D'instructions

Care and Maintenance

NOTE: Disconnect the power cord before
cleaning or leave the door open to deactivate
the oven during cleaning.

Cleaning the exhaust filters

The oven ventilation exhaust filters should be
removed and cleaned often; generally at least
once every month.
CAUTION
To avoid risk of personal injury or property damage, do
not operate oven hood without filters properly in place.
Surface lights
Ventilation filters
1. To remove the exhaust ventilation filters,
slide the filter to the rear. Then pull filter
downward and push to the other side.
The filter will drop out. Repeat for the 2nd
filter.
2. Soak the ventilation filters in hot water
using a mild detergent. Rinse well and
shake to dry or wash in a dishwasher. Do
not use ammonia. The aluminum on the
filter will corrode and darken.
3. To reinstall the exhaust ventilation filter,
slide it into the side slot, then push up
and toward oven to lock.
Reinstall the 2nd filter using the same
procedure.

Surface light replacement

Front
To avoid risk of personal injury or property damage,
wear gloves when replacing the light bulbs.
1. Unplug the microwave oven or turn off
power at the main circuit breaker.
Rear
2. Remove the bulb cover mounting
screws at both light positions under the
microwave.
3. Replace bulb with 30 watt appliance bulb.
4. Re-install bulb cover and mounting screw.
5. Plug the microwave back into the power
supply or turn the power back on at the
main circuit breaker.
CAUTION
24