Technical Information - AEG FAVORIT 55002 VI0P Notice D'utilisation

30 www.aeg.com
2. Press and hold, at the same time,
button
until the indicators of buttons
3. Press button
•
The indicators of buttons
• The indicator of button
continues to flash.
• The display shows the current set-
ting.

11. TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
12. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
and button
and start to flash.
.
go off.
Width / Height / Depth
(mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
1)
Cold water or hot water
Place settings
Left-on mode
Off-mode
. Put the packaging in
,
4. Press button
setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
and
ting.
6. Adjust the released quantity of rinse
aid.
7. Fill the rinse aid dispenser.
2)
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
Rinse aid dispenser off.
Rinse aid dispenser on.
to change the
596 / 818 - 898 / 550
220-240 V
(0.5 / 0.05 ) / (8 / 0.8 )
max. 60 °C
50 Hz
12
0.10 W
0.10 W