Quick Guide - Bosch Boso medilife S Mode D'emploi

Quick guide

Insert batteries, ensure correct posi-
tioning (page 45)
Attach unit (page 50)
When measuring, the wrist must be
held at the same height as the heart!
Start (and stop) a measurement by
pressing the 'START' button (page 50)
Measured systolic, diastolic and pulse
values are displayed after the measure-
ment is completed (page 53)
Retrieving values from memory
(page 54): with the instrument swit-
ched off, press the 'START' button
until 'M' is displayed. The first value
displayed is the average value of all
stored measurements together with
the WHO classification.
The total number of stored measure-
ments is displayed at the same time,
e.g. 'A30'. The individual measure-
ment values are then displayed in
sequence.
This quick guide does not replace
the detailed information on the use and
safety of the blood pressure monitor
featured in the user instructions.
Therefore, please ensure rea-
ding the user instructions!
39