Metabo PowerMaxx PA 12 LED-USB Notice D'utilisation page 10

Transport of li-ion battery packs:
The shipping of li-ion battery pack is subject to laws
related to the carriage of hazardous goods (UN 3480
and UN 3481). Inform yourself of the currently valid
specifications when shipping li-ion battery packs. If
necessary, consult your freight forwarder. Certified
packaging is available from Metabo.
Only send the battery pack if the housing is intact and
no fluid is leaking. Remove the battery pack from the
machine for sending. Prevent the contacts from
short-circuiting (e.g. by protecting them with adhesive
tape).
3. Overview
See page 1.
1 LED lights
2 Belt hook
3 On/Off switch for LED lamps
4 12V connector (only for HJA 14.4-18 (6.570...)
5 USB port
6 Operation display
7 On/off switch
8 Battery pack (*not in scope of delivery)
4. Commissioning
Insert a fully charged battery pack (8) (*not included
in the scope of delivery)
5. Use
The Power Adapter can be worn on the belt hook (2)
of the user's belt.
5.1 LED lights
Using switch (3) switch on or off (press for at least
0,5 seconds).
Do not direct the light beam into the eyes of
people or animals.
5.2 Charge/operate USB device
Connect the USB device with a suitable cable with the
Power Adapter by plugging into the USB port (5) and
start the power supply pressing (for at least
0,5 seconds) the on/off switch (7). The power
indicator (6) will light up green.
Only connect USB devices which are
compatible with the USB standard. Using
incompatible devices can lead to malfunctions,
damage or injury.
Disconnect the USB device after use or after
charging from the Power Adapter.
After a period of 7 hours, the Power Adapter will
switch off automatically.
5.3 12V connector for operation of the heated
jacket HJA 14.4-18 (6.570...)
Connect the heated jacket HJA 14.4-18 using the
corresponding cable to the Power Adapter by
plugging in the 12V connector (4) and start the power
supply by pressing (for at least 0,5 seconds) the on/
off switch (7).
10