Troubleshooting; Wiring Diagram - Lofrans GALAXY 703 Manuel D'installation Et D'utilisation

www.lofrans.com

6 TROUBLESHOOTING

FAULT
V=11.6 Vdc
V= 7.9 Vdc

7 WIRING DIAGRAM

Version 3.00
www.busse-yachtshop.de | info@busse-yachtshop.de
CAUSE
Though UP or DOWN keys
are pressed, the instrument
doesn't receive any signal from
the magnetic sensor for more
than 5 seconds.
The instrument's power
supply voltage is lower than10Vdc.
CORRECTIVE ACTION
Check the sensor electric connections.
Check if sensor operates properly.
If not, replace it.
Check the position of sensor and magnet on
gipsy and their distance (3 mm).
Check the operation of electric
installation or anchor windlass.
Verify the battery charge or
operation of the electricssystem.
UK
11