Configuration By Sms Commands - JabloCom EYE-02 Guide De L'utilisateur

COMMAND DESCRIPTION
The EYE-02 camera will send back an SMS indicating the current camera status.
Structure: <Remote Access Password> STATUS
Example: Camera EYE-02 status: SLEEP mode, Time: 12/10/2011 13:56:31, power: AC, batte-
ry: 100%, gsm: O2-CZ 100%
Camera EYE-02
STATUS
SLEEP mode
Time:12/11/2009 13:56:31
Power: AC
Battery: 100%
gsm: O2-CZ 100%
The EYE-02 camera returns a multimedia message with a picture of the current scene in front of the
camera. The message also contains the current camera status.
PICTURE
Structure: <Remote Access Password> PICTURE
The EYE-02 camera sends a report of the 10 latest events. The camera sends up to 5 SMS.
REPORT SMS
Structure: <Remote Access Password> REPORT SMS
The EYE-02 camera sends an MMS with the last alarm event recorded in the camera history.
REPORT MMS
Structure: <Remote Access Password> REPORT MMS
This command has been designed especially for prepaid SIM cards. The EYE-02 camera will return
a text message with information about the current credit on your SIM card. This function is provided
by your network operator and might not work correctly on some networks.
CREDIT
Structure: <Remote Access Password> CREDIT < USSD command >
<USSD>
Example: MIKE CREDIT *22#
Where MIKE is remote access password and *22# is example of USSD command supported by
operator to find out the credit balance on prepaid cards. It is different for each network operator.
The camera sends back a text message with a list of the SMS commands.
HELP
Structure: <Remote Access Password> HELP
If the camera is enrolled to a wireless Device, this command switches its programmable output.
Parameters are ON or OFF. If you would like to make a pulse on the output, send the command ON
<time in seconds>.
Please see the chapter on External Wireless Peripherals.
Structure (for DeviceX): <Remote Access Password> <DeviceX ON/DeviceX OFF/DeviceX ON
time parameter>
ON / OFF
Example: MIKE DeviceX OFF ---
DeviceX / DeviceY
The possible actions are ON and OFF only. If DeviceX/DeviceY is set to PULSE mode in JabloTool, it
can be switched ON only. The time parameter is optional. It can be in 01:30:00 or 1h 30m 0s format.
Example: MIKE Sprinkler ON 100s ---
seconds.
DeviceX and DeviceY can be renamed and operated via JabloTool web interface www.jablotool.com
or via JabloTool software.

4.3 Configuration by SMS Commands

Basic configuration settings of EYE-02 camera can be changed via SMS commands. The camera can be configured
from any phone in case it is protected by Remote Access Password or by Configuration Password. If the camera is
protected by Configuration Password, then SMS commands configuring the camera must begin with this password.
If the Configuration Password is not set and camera is protected only by Remote Access Password, then SMS com-
mands configuring the camera must begin with Remote Access Password.
If you decide not to protect your camera by any of the passwords, you will be able to configure the camera only
from phones entered in the list of camera contacts. The camera confirms configuration commands with an SMS.
COMMAND
CONFIG PROFILE
EYE-02.ENG.MAN.User_Manual.23.C
DESCRIPTION when camera is protected by Configuration Password
Profile setting, <profile> is HOME, OUTDOOR, GARAGE, SHOP or CARE
Structure: <Configuration Password> CONFIG PROFILE <Name of requested Profile>
Example: HELEN CONFIG PROFILE HOME
Where HELEN is configuration password. The command switches the camera to the profile
HOME
Name of your camera
Current camera status
Time (date) of status report
Indicates that camera is powered from AC power.
Indicates how much the battery is charged.
Indicates the GSM network and strength of GSM signal.
Switches OFF DeviceX
Switches ON Device X named «Sprinkler" for 100
- 13 -
EN
ES
DE
FR
NO
FI