Publicité
Les langues disponibles
Les langues disponibles
3
115155
DIGITAL MICROMETER QUICK
Operating instructions
1
7
Legend
1. Measuring clamp
2. Carbide measuring surfaces
3. Measuring spindle
4. Locking device
5. Scale
6. Ratchet
7. Heat protection plate
8. ON/OFF - SET button
9. ABS/INC - UNIT button
10. LCD display
11. Battery compartment (rear side)
Safety instructions
•
Clean measuring surfaces before use
•
Use the micrometer only at the permissible operating temperature
•
Protect the micrometer from mechanical damage
•
The electronics must not be exposed to a strong magnetic field
•
The electronics must not be opened
•
If the battery icon flashes in the display - change the battery
•
Dispose of battery and micrometer properly
Repair
If the instrument is defective, please contact our
service centre → Servicecenter@brw.ch
Brütsch/Rüegger Werkzeuge AG, Heinrich Stutz-Strasse 20, Postfach, CH-8902 Urdorf, Tel. +41 44 736 63 63, Fax +41 44 736 63 00, www.neriox.tools, sales@brw.ch
2
3
4
8
9
5
10
Specification
Measuring range:
Resolution:
Spindle pitch:
Measuring force:
Operating temperature:
Power:
Protection class:
Properties
ON/OFF:
SET:
ABS/INC:
UNIT:
Auto-Power OFF:
Operation
Switch on/off:
Set pre-selection value (zeros):
T oggle measuring mode:
T oggle measuring unit:
Instructions for care
A soft cloth can be used for cleaning the surfaces.
Do not use petrol, acetone or isopropanol for cleaning under any circumstances.
Remove the battery if the instrument is not going to be used for an extended period.
6
11
0...25 mm
0.001 mm
2 mm / revolution
5...10 N
0...40°C
Battery SR44 / 1.55V
IP65
Switch display on/off
Set pre-selection value (zeros)
T oggle measuring mode
T oggle mm/inch
Automatic shutdown
Short press of ON/OFF button
Long press of SET button
Short press of ABS/INC button
Long press of UNIT button
Publicité
