Domo DO1052DV Mode D'emploi page 35

· Install the handle.
· Allow the appliance to stand for 8 hours before turning it on. This allows the cooling agent to settle.
· After installation, let the freezer turned on for 24 hours before using it. This way the desired
temperature can be reached.
oor
DOOR CONVERSION
oor
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
The freezer has a reversible door. If you need to hinge your door on the opposite side it is recommended
s unplugged and empty.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
that you call your local authorised service agent to make this conversion or ask a technician.
oor
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
slip during the door reversing process.
s unplugged and empty.
Before you reverse the door, you should ensure the appliance is unplugged and empty.
d must be saved to do the reinstallation of the door.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
it flat as this may damage the coolant system.
slip during the door reversing process.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
2 people handle the unit during assembly.
d must be saved to do the reinstallation of the door.
1. Remove the screws on the back of the top cover.
s unplugged and empty.
it flat as this may damage the coolant system.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
2 people handle the unit during assembly.
slip during the door reversing process.
d must be saved to do the reinstallation of the door.
ews at rear side of top cover.
it flat as this may damage the coolant system.
2 people handle the unit during assembly.
ews at rear side of top cover.
ews at rear side of top cover.
2. Remove the top cover from the freezer.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
3. Remove the three screws and then remove the top hinge that holds the door in place. Lift the door
and place it on a padded surface to prevent it from being scratched.
ge and then remove door and place it on a soft pad to
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
www.domo-elektro.be
unscrew
unscrew
unscrew
16
35
DO1052DV