Hands-Free Phone Control - Alpine X901D Guide De Référence Rapide

Hands-Free Phone Control

Hands-free calls are possible when using an HFP (Hands-Free Profile) compatible mobile phone with this unit.
How to connect to a Bluetooth
compatible device (Pairing)
The Bluetooth function is always available on this unit.
You can, therefore, search for a Bluetooth device for pairing at any
time.
1
Touch [Setup] button on the Menu screen.
2
Touch [Bluetooth].
• Make sure the "Bluetooth" setting is "On" ( ).
3
Touch [Set Bluetooth Device].
4
Touch [ ] (Search) of "No Device."
5
Touch [ ] (Audio), [
[ ] (Both) of the device you want to
connect from the list.
Audio: Sets for use as an Audio device.
Hands-free: Sets for use as a Hands Free Device.
Both: Sets for use as both an Audio device
and Hands Free Device.
6
When the device registration is complete, a
message appears and the device returns to
normal mode.
12
-EN
[Setup] button
] (Hands-free) or
Owner's manual
• You can register up to 5 Bluetooth compatible mobile
phones.
• The Bluetooth registration process differs depending on
the device version and SSP (Simple Secure Pairing). If a 4
or 6 character Passcode appears on this device, enter the
Passcode using the Bluetooth compatible device.
If a 6 character Passkey appears on this device, make
sure the same passkey is displayed on the Bluetooth
compatible device and touch "Yes. "
Answering a Call
1
An incoming call triggers the ringtone and
an incoming call display.
Incoming call notification screen
2
Touch incoming call notification screen.
The call starts.
Call info area
• Touch the call info area or press the
button during a phone call to switch to the
Phone Operation screen. Then you can adjust the
speech volume, etc.
• You can also start the call by pressing the
(PHONE) button.
Hanging up the Telephone
1
Touch [
The call finishes.
Bluetooth Setup, Bluetooth Operation
] (End Call).
(PHONE)