Product Description - VOLTCRAFT LSG-4 DMM Notice D'emploi

PRODUCT DESCRIPTION

The multimeter (referred to as DMM in the following) indicates measured values on the digital display
together with the units and symbols. The measuring value display of the DMM comprises 2000 counts
(count = smallest display value).
If the DMM is not operated for approx. 15 minutes, it turns itself off automatically. This saves the bat-
teries and ensures longer operating time.
Cables are detected via a coupled acoustic signal that can be traced touchless with the receiver. A set
of headphones can be connected to the receiver and the volume is adjustable.
The line status (right/wrong polarity and ring tone) of the telephone lines are displayed on a separate
LED display and works independent of the DMM.
The measuring device can be used for do-it-yourself or for professional applications.
For better readability, the DMM can also be mounted with the clip on the rear.
Rotary switch (4) on the multimeter
The individual measuring functions are selected via a rotary switch.
The automatic range selection "auto range" is active in all measuring
ranges. The appropriate range of measurement is set for each applica-
tion individually.
The measuring function diode test and continuity test have dual
assignments. These functions are switched with the button
"MODE" (6).
If the rotary switch is set to "OFF", the measuring device is switched
off. Always turn the measuring device off when it is not in use.
27