_______________________________________________________________________________________________________________________________
Ash
Empty the ash drawer before it becomes completely full. Always leave a layer of ash on the bottom of the stove, as
this insulates the combustion chamber and makes lighting a fire easier.
Cleaning the wood burning stove
The stove's surface is treated with a heat-resistant Senotherm® paint, which will stay at its best just by being
vacuumed with a small, soft mouthpiece or dusted with a soft, dry cloth. Do not use water, spirit or other solvents
which will remove the paint.
The inside of the wood burning stove and the flue pipe can be cleaned via the door and the cleaning aperture in the
flue pipe/chimney. The upper fireproof tile (the exhaust deflector) can be removed, allowing access to the top of the
wood burning stove. Cleaning of the inside of the wood burning stove and the flue pipe should be undertaken at
least once a year, or more frequently if necessary, depending on how often the wood burning stove is used. This
work can also be carried out by the chimney sweep.
Repairing the surface
If the surface of your wood burning stove gets scratched or worn, it can easily be refaced/renewed using the original
Senotherm® paint in an aerosol can. It is available in black or grey from your local dealer.
Please note: All maintenance and cleaning of the wood burning stove should be carried out when it is cold.
Spare parts and unauthorized alterations
You may only use original spare parts in the wood burning stove. Read more at www.aduroshop.com. All forms of
unauthorized alterations to the wood burning stove are strictly forbidden, as the wood burning stove will no longer
comply with the approved specifications.
6.0 Accessories
There is a wide product range of accessories for Asgård stoves:
Companion sets
Firebaskets in felt, PET and bonded leather
Firewood buckets
Briquette bucket and ashbucket
Glass and steel floor plates
Flue pipes
Aduro Easy Firelighter
Aduro Easy Clean pad
7.0 Product liability and warranty
In accordance with the Danish Sale of Goods Act, product liability will exist for two years from the date of purchase
of the wood burning stove. The dated receipt will be sufficient proof. Product liability will not cover damage caused
by incorrect installation and use of the wood burning stove. Likewise, product liability will not cover loose parts and
wear parts (fireproof tiles, glass, gaskets, rails, cast iron grate and control), as they are worn by ordinary use. These
parts can be purchased as spare parts.
8.0 FAQ
If you need more information, please go to www.adurofire.com.
Enjoy your stove!
- 21 -