Becker Centronic SunWindControl SWC545-II Notice De Montage Et D'utilisation page 34

Assembly and Operating Instructions
Program menu
PROGRAM
The FUNCTION menu allows you to choose between switching and blocking
times.
These can be set via the PROGRAM menu.
SWITCHING TIME
Programmable switching times for extension and retraction of awnings.
BLOCKING TIME
Ensures that your awnings are not extended too early or retracted too late.
E.g.: blocking time t: 9:00
The sun protection system (awning) will not be extended before 9 a.m.
Blocking time s: 16:00
The sun protection system (awning) will be retracted at 4 p.m. even if the sun
is still shining.
Settings menu
SETTING menu
The following settings can be made via the SETTING menu:
• SUN t (for programmed sensor)
• DELAY t (only for Expert mode ON and programmed sensor)
• SUN s (for programmed sensor)
• DELAY s (only for Expert mode ON and programmed sensor)
• INTERMEDIATE POSITION
• FABRIC TENSION
• WINTER OFF/ON
• WIND CONTROL
• TIME END POSITION/INTERMEDIATE POSITION/FABRIC TENSION (only for
pre-programmed switching or blocking time)
• SUN END POSITION/INTERMEDIATE POSITION/FABRIC TENSION (for pro-
grammed sensor)
• Language selection (ENGLISH GB)
• SUMMER/WINTER (automatic clock adjustment for daylight saving)
To make settings, press the OK button repeatedly until you reach the menu level
required.
34