Features; Charging The Jump Starter - Napa Blue Fuel 85-924 Manuel D'utilisation

5. FEATURES

2
1
1. ON/OFF switch
2. LCD display
3.
Display ON/OFF button
4. Battery clamps
with smart cable
5. Jump start output socket
6. USB port – 1A

6. CHARGING THE JUMP STARTER

IMPORTANT! CHARGE IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE AND EVERY 30 DAYS, OR WHEN THE
CHARGE LEVEL FALLS BELOW 85%, TO KEEP THE INTERNAL
BATTERY FULLY CHARGED AND PROLONG BATTERY LIFE.
6.1 CHECKING THE LEVEL OF THE INTERNAL BATTERY
1. Slide the ON/OFF switch to the ON position. The LCD display will show
the battery's percentage of charge. A fully charged internal battery will read
100%. Charge the internal battery if the display shows it is under 85%.
2. To reduce the risk of electric shock, unplug the unit's wall charger from the
outlet before attempting any maintenance or cleaning. Simply turning off
the controls will not reduce this risk.
3. When charging the internal battery, work in a well ventilated area and do
not restrict the ventilation in any way.
6.2 CHARGING THE INTERNAL BATTERY
WARNING! Use only the charger included with the unit to charge the
internal battery. Using any other charger will damage the unit.
1. Plug the AC wall charger into the unit's 15V/1A input socket.
2. Connect the wall charger to a 120VAC electrical wall outlet.
3. The LCD display will light, the digit begins to flash and show "IN",
indicating that charging has begun.
4. The jump starter will fully charge in 2-3 hours. When the unit is fully
charged, the display will show "100%".
3
4
7. USB port – 2.1A
8. Input socket for recharging
9. 100V~240V AC wall charger
10. LED light (on back)
11. Carrying case
• 7 •
5 6
Not shown:
7 8
9