Manufacturer's Declarations - Cameo F1 Manuel D'utilisation

DMX mode:
DMX functions:
Controller:
Stand-alone functions:
Operating elements:
System settings:
Display elements:
Operating voltage:
Power consumption:
Luminous flux:
Efficiency:
Power supply connection:
Connection for external battery:
Ambient temperature (in operation):
Risk group:
Housing material:
Housing color:
Housing cooling:
Protection rating:
Dimensions (W × H × D, without mount-
ing bracket and barn door):
Weight:
Additional features:
MANUFACTURER´S DECLARATIONS
MANUFACTURER'S WARRANTY & LIMITATIONS OF LIABILITY
You can find our current warranty conditions and limitations of liability at: https://cdn-shop.adamhall.com/media/pdf/MANUFACTU-
RERS-DECLARATIONS_CAMEO.pdf. To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1,
61267 Neu Anspach / Email: Info@adamhall.com / +49 (0)6081 / 9419-0.
CORRECT DISPOSAL OF THIS PRODUCT
(valid in the European Union and other European countries with a differentiated waste collection system)
This symbol on the product, or on its documents indicates that the device may not be treated as household waste. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal. Please dispose of this product separately from other waste
and have it recycled to promote sustainable economic activity. Household users should contact either the retailer where they purchased
this product, or their local government office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed
with other commercial waste for disposal.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation
18
1CH dim, 2CH dim 16 bit,2CH dim CCT, 3CH RGB, 4CH dim CCT tint, 4CH RGBW,
6CH HSI-CCT,7CH RGB CCT, 8CH RGBW 16 bit, 10CH HSI - CCT, 16CH direct - CCT
dimmer, dimmer fine, strobe, RGBW, RGBW fine, CCT with tint, HSI, color macros, record user
color, color preset crossfade, dimmer curve, dimmer response, PWM frequency, red shift, fan
setting, display, default set
DMX512, RDM-enabled
dimmer, CCT with tint, HSI, RGBW, gel, user colors 1–8, user loops 1–8, master/slave, delay
time slave, Quick Light
3x push button rotary encoder, manual zoom
display flip, display backlight On/Off, DMX fail, dimmer curves, dimmer response, red shift,
PWM frequency, color calibration, auto lock, fan settings, factory reset, UC/loops reset
OLED display
100–240 V AC / 50–60 Hz
128 W
2600 lm
20 lm/W
INPUT: Seetronic, PowerCON TRUE1 compatible
OUTPUT: Seetronic, compatible with PowerCON TRUE1 (max. 11.5 A)
4-pin XLR, male (pin 1 = negative, pin 4 = positive, standard 14.4 or 14.8 volt V-mount
batteries)
-15 to +45°C
RG1
cast metal
black
temperature controlled fan + heat pipe
IP20
274 x 257 x 353 mm
4.6 kg
150 mm Fresnel lens. Manual zoom. Mounting bracket. Safety cable for accessories, power
cable, filter frame, and 8-way door barn included. V-mount adapter optionally available.