Publicité
Les langues disponibles
Les langues disponibles
11.3. OLP: Over Load Protection
Normally the overload protection is sustained by the CC constant current mode.
When the CC mode fails and goes undetected, it may cause serious damage to your test piece or
load.
The OLP is to minimize the extent of damage to your loads as power supplies do fail some day.
Switch off your power supply as soon as you see this warning as shown below.
To reset this warning, switch off the unit and remove all loading.
Switch the unit back on again and double check with caution.
If this problem cannot be fixed, please contact and consult with your agent.
All rights, also for translation, reprinting and copy of this manual or parts are reserved.
Reproduction of all kinds (photocopy, microfilm or other) only by written permission of the publisher.
This manual considers the latest technical knowing. Technical changing which are in the interest of
progress reserved.
We herewith confirm, that the units are calibrated by the factory according to the specifications as per
the technical specifications. We recommend to calibrate the unit again, after one year.
®
© PeakTech
09/2016/MP
-41-
Publicité
