6
7
8
Notes
........................................................................................................
........................................................................................................
........................................................................................................
........................................................................................................
........................................................................................................
........................................................................................................
........................................................................................................
Fit the Brush / Pad (Fig 9).
Push in the deck
locking pin (Fig 10)
and rotate the
brush deck into
the operating
position (Fig 11).
Fig 9
Turn on the clean water tap (Fig 12).
Fig 12
To start: hold either trigger and press the yellow start button once
(Fig 13).
Brush, vacuum and water settings can be controlled by the control panel
(See Page 34).
Fig 13
Fig
Fill the clean-water to a Max of 40 litres (see page 28)
For operation and cleaning controls (see page 34)
Fig 10
22
Off
butto
Fig 11
On